MODEL: MICRODAB10
Features
4
DAB mode
4.22 Press the SOURCE button or the DAB/FM button to switch
to the DAB mode.
4.23 Press the / button on remote control or the PREV/NEXT
button on the panel to find the previous or next station, then
press the ENTER on remote control or PLAY/PAUSE button on
the panel to activate the station.
4.24 Press and hold one of the NUMBER buttons 0-9 to store the
station under that number. Press the required number button
to select a preset and press the ENTER button to activate the
stored station.
4.25 Press the INFO button on remote control to cycle through the
station information: DLS text, signal strength, program type,
ensemble name, channel frequency, signal error, and bit rate.
4.26 Manual tune
a) Press the MENU button on remote control, then press the
PREV/NEXT button on the panel or / button on remote
control to find <MANUAL TUNE> and press the ENTER
button on remote control or PLAY/PAUSE button on the
panel to enter the manual tune options interface.
b) Press the PREV/NEXT button on the panel or / button
on remote control to cycle through the stations from 5A to
13F.
c) When you have selected one of the stations from 5A to 13F,
press the PLAY/PAUSE button on the panel or the ENTER
button on remote control to view the details, press again to
activate the station.
4.27 Auto scan
Press the MENU button on remote control, when AUTO SCAN
appears, press the PLAY/PAUSE or ENTER button, the unit will
search for all available DAB stations.
ENTER
PLAY/PAUSE
PREV NEXT
MENU
DAB/FM
ENTER
To Next Page
Loading...
