What to do if my Goodmans Radio has poor reception?
Like any radio service, weak signal areas can cause poor reception. Follow the instructions for Manual Tuning and adjust the aerial while monitoring the signal strength until you get the best signal. If the reception is still poor, try moving the radio to a different spot in the room.
How to fix 'NO SERVICES AVAILABLE' on my Goodmans OXFORD Radio in DAB mode?
If your Goodmans Radio displays 'NO SERVICES AVAILABLE' in DAB mode, first check that DAB coverage is available in your area. If coverage exists, try adjusting the position of the aerial or the location of the radio itself.
What to do if some buttons on my Goodmans DAB Digital Radio are not working?
If some buttons on your Goodmans DAB Digital Radio aren't working, it could be due to electrostatic discharge. Turn the radio off, unplug it from the mains, and then plug it back in after a few seconds.
Why is there no sound coming from my Goodmans OXFORD?
If you're not getting any sound from your Goodmans Radio, verify that the volume isn't set too low. Also, ensure that the radio has successfully tuned into DAB or FM stations.
Why can't I access secondary services on my Goodmans OXFORD Radio?
Currently, not many secondary services are available. This will increase as more DAB stations start broadcasting. If a secondary service station is available, the secondary indicator ‘>>’ will be displayed next to the station name.
Lists items included in the product packaging.
Identifies controls and indicators on the top of the radio.
Identifies ports and controls on the side of the radio.
Identifies ports and features on the rear of the radio.
Steps to turn on the radio and perform an initial station scan.
How to select different DAB radio stations.
Procedure to scan for available DAB radio stations.
Instructions for controlling the audio volume level.
Procedure to turn off the radio.
Switch to turn on/off the unit and adjust the volume.
Switch to navigate between stations, one by one, and adjust volume.
Press and hold to save a station as a preset.
Press the SCAN button to perform a full scan.
Press to switch between DAB and FM mode, or press and hold.
Press to make a selection.
Used to connect external audio sources to the DAB+ FM Radio.
Plug in headphones to listen to the radio.
The radio's antenna for receiving broadcast signals.
Used to connect the DAB+ FM Radio to the mains power supply.
How to save favorite radio stations to preset memory.
How to recall and listen to saved preset stations.
How to perform an automatic scan for radio stations.
How to change between DAB and FM radio reception modes.
Accessing and using the menu features while in DAB mode.
Accessing and using the menu features while in FM mode.
How to connect and use headphones for listening.
Connecting and playing audio from external devices like MP3 players.
How to perform a full system reset and its consequences.
To Next Page
General
