Need help?Do you have a question about the Google Nest Power Connector and is the answer not in the manual?
General| Output Voltage | 24V AC |
|---|---|
| Wire Gauge Compatibility | 18-22 AWG |
| Compatibility | Nest Thermostat E |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 5% to 95% (non-condensing) |
| Power | 20 VA |
| Purpose | Provides power to Nest Thermostat when no C-wire is available |
Details operating temperature, voltage rating, and ingress protection for the Nest Power Connector.
Instructions to install your Nest thermostat before connecting the power connector.
Guidance on updating Nest Thermostat and Nest Learning Thermostat software versions.
Essential safety step to disconnect power at the breaker panel before installation.
Steps for safely opening the HVAC equipment cover to access wiring.
Instructions for locating the main circuit board or thermostat wires within the HVAC unit.
Advice on documenting existing wiring by taking photos before disconnection.
Detailed wiring instructions for connecting the power connector to various HVAC system types.
Procedure for closing the HVAC cover and restoring power to the system.
Steps to verify the successful installation of the power connector on your thermostat.
Information on seeking professional help and resources for advanced installation instructions.
Step-by-step guide on how to properly use the provided wire connectors for secure connections.
Links to online resources for assistance, support, and accessibility information.
To Next Page
