Google Nest Power Connector User Manual

8 9
ENGLIS H
3. Turn o the power at the
circuit breaker
This protects you and your equipment
2. Update your thermostat
Nest Thermostat
Go to Seings > Version > Update and get
version 1.1 or later
Troubleshooting
• You may see a wiring error. This’ll go away
aer installing the power connector.
• Adjust your thermostat target temperature
so your system isn’t heating or cooling.
This can prevent some errors.
• Replace thermostat baeries if prompted
Nest Learning Thermostat 3rd gen and
Nest Thermostat E
No need to update
Find additional instructions at
g.co/nest/nestpowerconnectorupdate
To check which thermostat you have, visit
g.co/nest/whichthermostat

Google Nest Power Connector Specifications

General

Output Voltage	24V AC
Wire Gauge Compatibility	18-22 AWG
Compatibility	Nest Thermostat E
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	5% to 95% (non-condensing)
Power	20 VA
Purpose	Provides power to Nest Thermostat when no C-wire is available