GET STARTED 2
The SIM card tray is located on the left side
of the phone below the volume button. The
eject button is a small hole just above the
tray door. To install a new micro SIM card:
1. Insert the SIM ejection tool that comes
with the phone (or a thin pin) into the eject
button hole, and push rmly but gently un-
til the tray pops out.
2. Remove the tray and place the micro SIM
card inside it, with the contacts out and
the angled corner to the right.
3. Carefully reposition the tray in the slot
and push it gently back into the phone.
TIP: Your phone’s IMEI identication
number is on the SIM card tray. You
may need this number later to identify
your phone for service purposes. Write
down the IMEI number or take a photo
of the label on the product box.
To Next Page
Loading...
