GoPro HD HERO2 - Firmware Update; Using Your HD HERO2: Basics; Getting Started; Default Settings Snapshot

USING YOUR HD HERO2: BASICSFIRMWARE UPDATE
DEFAULT SETTINGS SNAPSHOT
Out of the box, your HD HERO2 camera is configured with the following featured
default settings:
Camera Mode: Video
Video Resolution: 960p-30fps
Field of View: 170º Wide
Still Photo Resolution: 11 Megapixels
Time Lapse Interval: 1 second
Power Up Mode: Video
 See SETTINGS MENU for more information on the camera’s default settings
and instructions on how to change them.
GoPro releases new camera features through firmware updates.
Visit gopro.com/firmware to download the latest updates.
GETTING STARTED
Before using the HD HERO2 for first time:
1. Insert a SD memory card into the SD card slot.
Your
HD HERO2 is compatible with SD + SDHC memory cards (Class 4 or
higher rated cards are recommended).
 See STORAGE/SD CARDS for more information.
2. Install the battery into your HD HERO2 camera.
3. Charge the battery.
The lithium-ion battery included with your HD HERO2 ships only partially
charged. For a full charge, use the USB cable to plug the camera into a power
source such as a computer or USB charging device. No damage will occur to
your battery if you are not able to charge it before using your camera.
 See BATTERY LIFE for more information.
8 9
USING YOUR HD HERO2: BASICS