64 65
Default Mode
This setting applies only when HERO4 Session is connected to the
GoPro App or a GoPro remote. You can select the capture mode that
appears when the camera is powered on with the app or the remote.
The options are Video (default), Looping Video, Photo, Burst, and
Time Lapse.
/ Setup Mode
LED
This setting determines whether the camera status lights (red) and
wireless status lights (blue) are on (default) or off.
Beeps
You can set the volume for the sound indicators to be 100% (default),
70%, or Off.
/ Setup Mode
To Next Page
Loading...
