80 81
Your HERO4 Session comes with two frames: the Standard Frame
and the Low-Profile Frame. Both frames work great in all scenarios.
For the most compact mounting, use the Low-Profile Frame.
Note: To prevent the frame from marking the surface of your camera, leave the latch on the frame
open when storing your camera in a frame for a long period of time.
The HERO4 Session camera is waterproof to 33’ (10m) with the
side door closed—no additional housing is needed when using the
camera in or around water.
NOTICE: The Standard Frame and the Low-Profile Frame do not
provide additional waterproof protection for your camera.
/ The Frames
TO SECURE THE CAMERA IN THE FRAME:
1. Open the latch.
2. Rotate the camera to the desired orientation, and then slide it into
the frame. The back of the frame has a raised edge. Be sure the
back of the camera sits flush against it.
3. Close the latch.
/ The Frames
To Next Page
