GoPro HERO3+ - Burst Photo Mode

16
USING YOUR HERO3+: CAMERA MODES
BURST PHOTO
In Burst Photo mode your camera takes multiple photos in short time intervals—
3 photos /1 second, 5 photos /1 second, 10 photos /1 second, 10 photos /2
seconds, 30 photos /1 second, 30 photos /2 seconds or 30 photos /3 seconds.
To capture a Burst Photo series, verify the camera is in Burst Photo mode.
If the Burst Photo icon on your camera’s LCD screen is not showing,
press the Power/Mode Button repeatedly until it appears.
To take a Burst Photo series:
Press the Shutter/Select Button
. The red Camera Status Lights flash
and the camera beeps multiple times.
PRO
TIP:
Sometimes 30 photos /1 second is too fast.
Try a slower BURST PHOTO setting to better match the action.
▶See BURST PHOTO for instructions on how to change the interval settings.