GoPro HERO3+ - Set Up; Set Up Menu

40
SET UP
SET UP
To enter the Set Up menu:
1. Verify the camera is in Settings mode. If the Settings icon
on your
camera’s LCD screen
is not showing, press the Power/Mode Button
repeatedly until it appears.
2. Press the Shutter/Select Button
to enter the Settings menu .
3. Use the Power/Mode Button
to cycle through Settings to locate the
Set Up menu
.
4. Press Shutter/Select Button
to enter Set Up.
5. Use the Power/Mode Button
to locate the desired option to change.
6. Press Shutter/Select Button
to select the desired option.
7. To exit, hold down Shutter/Select Button
for two seconds or cycle
through to
and press Shutter/Select Button to select it.