GoPro HERO3+ - Looping Video

35
CAPTURE SETTINGS
LOOPING VIDEO
Looping Video mode allows you to record a continuously looping video that
overwrites itself until you press the Shutter/Select Button
button to stop it.
Looping Video is not available if Protune mode is turned ON.
Looping Video options include:
OFF (Default)
Max video
Camera records until memory card is full, then overwrites
with a new video.
5 min video
Camera records for 5 minutes, then begins a new video,
progressively overwriting the previous 5 minute video.
20 min video
Camera records for 20 minutes, then begins a new video,
progressively overwriting the previous 20 minute video.
60 min video
Camera records for 60 minutes, then begins a new video,
progressively overwriting the previous 60 minute video.
120 min video
Camera records for 120 minutes, then begins a new video,
progressively overwriting the previous 120 minute video.
PRO
TIP:
Multiple chapter files are written to your memory card.
This allows for small segments of content to be overwritten
during loop recording. When viewing on a computer screen,
you will see separate files for each time segment. Use video
editing soware if you wish to combine files into a longer video.
NOTE: Looping Video is disabled in Protune mode.