GoPro HERO3+ - One Button Mode (Continued)

43
SET UP
ONE BUTTON MODE (continued)
To exit One Button mode:
1. Power camera ON.
2. Press and hold the Shutter/Select Button
until shows
in the LCD window.
3. Press the Shutter/Select Button
to enter.
4. Use the Power/Mode Button
to highlight OFF.
5. Press the Shutter/Select Button
to select it.
6. To exit, hold down the Shutter/Select Button
for two seconds or cycle
through to
and press the Shutter/Select Button .
PRO
TIP:
To stop the capture process (VIDEO or TIME LAPSE)
when in ONE BUTTON, press and hold the Shutter/Select
Button
for two seconds. You will return to the ONE
BUTTON menu where you can turn ONE BUTTON mode OFF.
NOTE: One Button mode is disabled when connected to Wi-Fi Remote or GoPro App.