GoPro HERO3+ - Page 46

46
SET UP
MONTH / DAY / YEAR / TIME
Set the HERO3+ clock to ensure Video and Photo files are saved with the
correct date and time.
To change Month/Day/Year/Time:
1. Verify the camera is in Settings mode. If the Settings icon on your camera’s
LCD screen
is not showing, press the Power/Mode Button repeatedly until
it appears.
2. Press the Shutter/Select Button
to enter the Settings menu .
3. Use the Power/Mode Button
to cycle through Settings to locate
the Set Up menu
.
4. Press the Shutter/Select Button
to enter the Set Up menu.
5. Use the Power/Mode Button
to locate the Month/Day/Year/Time menu .
6. Press the Shutter/Select Button
to enter Month/Day/Year/Time menu;
Month (MM) will be highlighted.
7. Press the Shutter/Select Button
to access the list of months (1 to 12).
8. Use the Power/Mode Button
to cycle through list until desired selection
is highlighted.
9. Press the Shutter/Select Button
to select it.
10. To advance to the next option, press the Shutter/Select Button
.
11. Repeat steps 7, 8 and 9 to make selections for day (DD), year (YY),
hour (HH) and minutes (MM).
12. To exit, hold down the Shutter/Select Button
for two seconds or cycle
through to
and press the Shutter/Select Button .
NOTE: If the battery is removed from the camera for an extended period of time
Month/Day/Year/Time will need to be set again.