GoPro HERO3+ - Wireless Controls (Continued)

49
WI-FI + WI-FI REMOTE
WIRELESS CONTROLS CONTINUED
On the Wi-Fi Remote:
1. While holding down the Shutter/Select Button
, press and release the
Power/Mode Button
once to power the remote ON into pairing mode.
2. When you see
on the remote’s screen, you can release the
Shutter/Select Button
.
3.
will appear on both screens once the devices have paired.
4. The remote will now ask if you want to CONNECT ANOTHER? camera.
a. If you want to connect additional cameras at this time, press the
Shutter/Select Button
to select YES, then repeat the pairing
process from the beginning.
b. If no, press the Power/Mode Button
to cycle to NO, then press
the Shutter/Select Button
to select it.
The remote’s LCD screen will mirror the camera’s LCD screen. You can now
use the remote to control your camera.