11
OPERATING INSTRUCTIONS
Indicator Lights on Display panel
1. Operation lamp:
Illuminates when the unit is operational.
2. ALARM indicator:
Flashes when malfunction occurs.
3. TIMER indicator:
The indicator illuminates when TIMER is set ON/OFF.
4. DEFROST Indicator (For cooling& heating model only): This indicator illuminates
when the air conditioner starts defrosting automatically or when the warm air
control feature is activated in heating operation. It also illuminates when fan only
mode is selected.
5. Temporary manual button:
This button is used to operate the unit temporarily in case you misplace the
remote controller or its batteries are exhausted. One press of the manual control
button will lead to the forced AUTO operation. If press the button twice within five
seconds, the unit will operate under forced COOL operation. The forced COOL
operation is used for testing purposes only, please do not choose it unless it is
necessary.
Defrost indicator /
Fan only indicator
To Next Page
Loading...
