EasyManua.ls Logo

Gorenje Cooling - Care and Maintenance; Cleaning Exterior and Remote Controller; Wall-Mounted Air Filter Cleaning

Gorenje Cooling
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
CARE AND MAINTENANCE
Cleaning the Grille, Case and Remote
Controller
NOTE: Power supply must be disconnected
before cleaning air conditioner.
Turn off the system before cleaning. To clean,
wipe with a soft, dry cloth. Do not use bleach or
abrasives.
CAUTION!
A cloth dampened with cold water may be used on
the indoor unit if it is very dirty. Then wipe it with a
dry cloth.
Do not use a chemically treated cloth or duster to
clean the unit.
Do not use gasoline, thinner, polishing powder, or
similar solvents for cleaning. These may cause the
plastic surface to crack or deform.
Never use water hotter than 40°C to clean the front
panel, it could cause deformation of discoloration.
WALL-MOUNTED TYPE
Cleaning the air filter
A clogged air filter reduces the cooling efficiency of
this unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to an angle until it
stops with a clicking sound.
2. Take hold of the handle of the air filter and lift it
up slightly to take it out from the filter holder,
and then pull it downwards.
3. Remove the AIR FILTER from the indoor unit.
Clean the AIR FILTER once two weeks.
Clean the AIR FILTER with a vacuum cleaner
or water, and then dry it up in cool place.

Table of Contents

Related product manuals