EasyManua.ls Logo

Gorenje GI66160S - User Manual

Gorenje GI66160S
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
OPERATING
INSTRUCTIONS
DISHWASHER
GI66160
www.gorenje.com

Table of Contents

Questions and Answers

  • S
    Sheila JacksonAug 20, 2025
    Why is my Gorenje GI66160S Dishwasher not starting?
    • H
      Hayley DoyleAug 20, 2025
      Your Gorenje Dishwasher might not start because the door isn't properly closed, you opened the dishwasher mid-cycle, or the door lock hasn't clicked into place. Also, check if a fuse/circuit breaker has been tripped, the plug isn't in the wall socket, the water tap is off, or there are overflows/leaks. If you hear a whirring sound that doesn't stop when the power is off, turn off the water tap, pull out the plug, and call the service department. Finally, ensure the Delayed start option hasn't been selected; if so, press and hold the main power switch to cancel it and restart the dishwasher.
  • C
    Christopher SullivanAug 21, 2025
    What to do if my Gorenje GI66160S dishes are not clean?
    • D
      Darlene GibsonAug 21, 2025
      If your dishes aren't clean, it could be due to several reasons. First, check if the spray arms rotate freely and clean them if blocked. Select a longer, more suitable dishwashing programme and ensure you're using the correct detergent dosage for your water hardness. Avoid using old detergent and load the dishes correctly, preventing large bowls from covering porcelain or tall glasses from being placed in corners. Make sure glasses and cups are stable, the filters are correctly fitted with the handle pointing straight out, and the drainage pump stop is in place at the bottom drain.
  • D
    djacksonAug 25, 2025
    How to fix spots or films on dishes in Gorenje Dishwasher?
    • K
      Kimberly JonesAug 25, 2025
      Spots or films on dishes from your Gorenje Dishwasher can be due to several factors. Check if the salt compartment lid is properly tightened to prevent the water softener from leaking salt. Ensure the water softener and rinse aid settings are correct. Refill the salt compartment if empty. If using 3-in-1/All-in-one detergent, try inactivating the TAB setting and adding salt and rinse aid separately. High temperatures or too much detergent can also cause etching on crystal; wash crystal at a low temperature with less detergent.
  • J
    Jessica JacksonAug 26, 2025
    How to prevent spots on stainless steel or silver in Gorenje GI66160S?
    • P
      philipfrancisAug 26, 2025
      To prevent spots on stainless steel or silver in your Gorenje Dishwasher, rinse off foodstuffs like mustard, mayonnaise, lemon, vinegar, salt, and dressings from your dishes if you're not starting the dishwasher immediately; using the Rinse programme can help. Also, separate dishes made from different metals, such as silver, stainless steel, and aluminium, to avoid contact during dishwashing.
  • E
    Elizabeth RobertsAug 27, 2025
    What to do if Gorenje GI66160S Dishwasher shows 1 minute on display?
    • J
      Jamie MontgomeryAug 27, 2025
      If '1 minute' appears on the display of your Gorenje Dishwasher, it indicates the programme is taking longer than estimated. This could be due to blocked filters, which require cleaning of the coarse and fine filters. Ensure the filters are correctly fitted with the handle locked in the stop position. Check for debris in the drainage pump, clean it if necessary, and verify the drainage pump stop is in place. Lastly, inspect the drainage hose for any kinks or sharp bends.
  • A
    Alicia DominguezAug 29, 2025
    Why is there a bad odor in my Gorenje GI66160S Dishwasher?
    • P
      Phillip ReyesAug 30, 2025
      A bad odor in your Gorenje Dishwasher could be due to dirt around the seals and in corners; clean these areas with a washing-up brush and a low-foaming cleaner. Also, prolonged use of low-temperature programmes can cause this issue; run a higher temperature programme about once a month to resolve it.
  • D
    Dr. Elizabeth FreemanAug 31, 2025
    Why Gorenje Dishwasher buttons do not react?
    • M
      Marissa MolinaAug 31, 2025
      If the buttons on your Gorenje Dishwasher aren't responding, it might be because you pressed them too soon after opening the door; wait a moment and try again. The buttons could also be dirty, so clean them with a dry or slightly damp cloth. Ensure the door is open, as the buttons only work when the door is open.
  • M
    Mary KnightSep 2, 2025
    Why are my dishes not dry enough in Gorenje GI66160S Dishwasher?
    • D
      David PenaSep 2, 2025
      If your dishes aren't drying properly in your Gorenje Dishwasher, ensure the Auto open option is activated. A dishwasher that isn't fully loaded can also cause this issue, so try to fully load it before running a cycle. Check if the rinse aid needs topping up or if the dosage is set too low, and adjust accordingly. If you're using 3-in-1/All-in-one detergent, try inactivating the TAB setting and adding salt and rinse aid separately.
  • E
    Elizabeth WilliamsSep 4, 2025
    How to stop rattling sound from Gorenje GI66160S Dishwasher?
    • J
      Jessica BurnettSep 4, 2025
      A rattling sound during dishwashing in your Gorenje Dishwasher indicates that the dishes are not correctly placed or the spray arms are not rotating. Make sure the dishes are placed securely and spin the spray arms to ensure they can rotate freely.
  • J
    Justin LeeSep 6, 2025
    Why is there detergent residue in the Gorenje GI66160S Dishwasher compartment?
    • N
      Nicholas BurgessSep 6, 2025
      If you find detergent residue in the detergent compartment of your Gorenje Dishwasher after washing, it's likely because the compartment was damp when you added the detergent. Ensure the detergent compartment is dry before adding detergent.

Gorenje GI66160S Specifications

General IconGeneral
BrandGorenje
ModelGI66160S
CategoryDishwasher
LanguageEnglish

Related product manuals