Why Gorenje GI66168X Dishwasher buttons do not react?
If the buttons on your Gorenje Dishwasher aren't responding, it might be because you pressed them too soon after opening the door; wait a moment and try again. The buttons could also be dirty, so clean them with a dry or slightly damp cloth. Ensure the door is open, as the buttons only work when the door is open.
What does F54 error mean on Gorenje Dishwasher?
If your Gorenje Dishwasher displays the error code F54, it indicates overfilling. Turn off the water tap and call the service department.
What does F40 error mean on Gorenje GI66168X?
If your Gorenje Dishwasher displays the error code F40, it indicates an inlet valve leakage. Turn off the water tap and call the service department.
What does F10 error mean on Gorenje GI66168X?
If your Gorenje Dishwasher shows the error code F10, it means there is overfilling. Clear the drainage pump, referring to the Care and cleaning section. If the issue continues, contact the service department.
What does F52 error mean on Gorenje Dishwasher?
If your Gorenje Dishwasher displays error code F52, this indicates a water level fault. Clean the coarse and fine filters and check that the outer filter on the inlet hose is not blocked. If the problem persists, call the service department.
What does F12 error mean on Gorenje GI66168X?
If your Gorenje Dishwasher displays the error code F12, it indicates a water inlet fault. Check that the water tap is turned on and that the outer filter on the inlet hose is not blocked. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the problem persists, call the service department.
Why is there detergent residue in the Gorenje GI66168X compartment?
If you find detergent residue in the detergent compartment of your Gorenje Dishwasher after washing, it's likely because the compartment was damp when you added the detergent. Ensure the detergent compartment is dry before adding detergent.
How to stop rattling sound from Gorenje GI66168X?
A rattling sound during dishwashing in your Gorenje Dishwasher indicates that the dishes are not correctly placed or the spray arms are not rotating. Make sure the dishes are placed securely and spin the spray arms to ensure they can rotate freely.
Why are my dishes not dry enough in Gorenje GI66168X Dishwasher?
If your dishes aren't drying properly in your Gorenje Dishwasher, ensure the Auto open option is activated. A dishwasher that isn't fully loaded can also cause this issue, so try to fully load it before running a cycle. Check if the rinse aid needs topping up or if the dosage is set too low, and adjust accordingly. If you're using 3-in-1/All-in-one detergent, try inactivating the TAB setting and adding salt and rinse aid separately.
Why is my Gorenje GI66168X not starting?
Your Gorenje Dishwasher might not start because the door isn't properly closed, you opened the dishwasher mid-cycle, or the door lock hasn't clicked into place. Also, check if a fuse/circuit breaker has been tripped, the plug isn't in the wall socket, the water tap is off, or there are overflows/leaks. If you hear a whirring sound that doesn't stop when the power is off, turn off the water tap, pull out the plug, and call the service department. Finally, ensure the Delayed start option hasn't been selected; if so, press and hold the main power switch to cancel it and restart the dishwasher.
General| Delayed start timer | Yes |
|---|---|
| Half Load Option | Yes |
| Child Lock | Yes |
| Appliance placement | Built-in |
| Product size | Full-size |
| Dimensions (H x W x D) | 550 mm x 598 mm x 815 mm |
| Washing programs | Auto, Eco, Intensive, Quick |
| Delayed start | Yes |
| Water consumption per cycle | 9.6 l |
| Width | 598 mm |
| Depth | 550 mm |
| Height | 815 mm |
| Product Type | Dishwasher |
| Delay Start | Yes |
To Next Page
