How to stop rattling sound from Gorenje GI66168X?
A rattling sound during dishwashing in your Gorenje Dishwasher indicates that the dishes are not correctly placed or the spray arms are not rotating. Make sure the dishes are placed securely and spin the spray arms to ensure they can rotate freely.
Why is there detergent residue in the Gorenje GI66168X compartment?
If you find detergent residue in the detergent compartment of your Gorenje Dishwasher after washing, it's likely because the compartment was damp when you added the detergent. Ensure the detergent compartment is dry before adding detergent.
What does F12 error mean on Gorenje GI66168X?
If your Gorenje Dishwasher displays the error code F12, it indicates a water inlet fault. Check that the water tap is turned on and that the outer filter on the inlet hose is not blocked. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the problem persists, call the service department.
What does F52 error mean on Gorenje Dishwasher?
If your Gorenje Dishwasher displays error code F52, this indicates a water level fault. Clean the coarse and fine filters and check that the outer filter on the inlet hose is not blocked. If the problem persists, call the service department.
What does F10 error mean on Gorenje GI66168X?
If your Gorenje Dishwasher shows the error code F10, it means there is overfilling. Clear the drainage pump, referring to the Care and cleaning section. If the issue continues, contact the service department.
General| Delayed start timer | Yes |
|---|---|
| Half Load Option | Yes |
| Child Lock | Yes |
| Appliance placement | Built-in |
| Product size | Full-size |
| Dimensions (H x W x D) | 550 mm x 598 mm x 815 mm |
| Washing programs | Auto, Eco, Intensive, Quick |
| Delayed start | Yes |
| Water consumption per cycle | 9.6 l |
| Width | 598 mm |
| Depth | 550 mm |
| Height | 815 mm |
| Product Type | Dishwasher |
| Delay Start | Yes |
To Next Page
