EasyManua.ls Logo

Gorenje IQ641AC - User Manual

Gorenje IQ641AC
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GLASS-CERAMIC INDUCTION BUILT-IN COKING HOB
INSTRUCTIONS FOR USE,
INSTALLATION AND CONNECTION
www.gorenje.com
MT
IE GB

Questions and Answers

  • M
    micheleeatonAug 6, 2025
    Why does the fuse blow when I switch on my Gorenje Hob?
    • S
      Sarah WheelerAug 6, 2025
      If a fuse blows as soon as the Gorenje Hob is switched on, it indicates that the hob has been wrongly connected. To resolve this, check the electrical connections.
  • G
    Gordon MurphyAug 10, 2025
    Why is the Gorenje IQ641AC display flashing when a cooking zone is on?
    • S
      Suzanne KingAug 10, 2025
      If the display on your Gorenje Hob flashes when a cooking zone is activated, it means the pan you're using isn't suitable for induction cooking or its diameter is less than 12 cm. Use a suitable pan to stop the flashing.
  • A
    Amy BrownAug 14, 2025
    What to do if my Gorenje Hob shows fault code E2?
    • J
      Jamie JuarezAug 14, 2025
      If your Gorenje Hob displays fault code E2, it means the hob has overheated. Let the hob cool down, and then use a lower setting.
  • C
    christopherrandallAug 19, 2025
    Why does my Gorenje IQ641AC Hob cooking zone stop and beep?
    • V
      vponceAug 19, 2025
      If a cooking zone on your Gorenje Hob suddenly stops working and you hear a signal, the preset time has ended. Stop the beeping by pressing any key.
  • T
    Tammy MckenzieAug 23, 2025
    Why does my Gorenje IQ641AC simply switch off?
    • S
      stephenjuarezAug 23, 2025
      If your Gorenje Hob simply switches off, it's likely because you accidentally touched the On/Off button or touched two buttons simultaneously. Switch the hob back on to resume use.
  • R
    Roy NewmanAug 27, 2025
    How to fix fault code ER22 on Gorenje Hob?
    • M
      Michelle DavisAug 27, 2025
      If your Gorenje Hob shows fault code ER22, it indicates that the control panel is dirty or has water on it. Clean the control panel to resolve the issue.
  • M
    marshalltinaSep 1, 2025
    What does fault code U400 mean on Gorenje IQ641AC?
    • J
      jenniferrojasSep 1, 2025
      If your Gorenje Hob displays fault code U400, it means that the voltage is too high and/or the hob is not properly connected. Have your connection changed.

Summary

Important Warnings

What you should pay attention to

Key precautions for safe operation and usage.

During use

Important safety and operational notes for using the hob.

Operation

Switching on the hob and setting the power

Step-by-step guide to turning on and adjusting heat settings.

Boost function

Instructions for using the high-power boost feature.

Cleaning and Maintenance

Cleaning

General instructions for cleaning the glass-ceramic hob surface.

Troubleshooting

Troubleshooting table

Common issues, their possible causes, and solutions.

Installation Instructions

What you need to consider

Important safety and preparation points before installation.

Electrical connection SIVK6, 7, 1

Wiring diagrams and requirements for electrical connection.

Building in

Steps and considerations for physically installing the hob.

Gorenje IQ641AC Specifications

General IconGeneral
Hob TypeInduction
Number of Cooking Zones4
Control TypeTouch Control
Power Levels9
Width60 cm
ColourBlack
Total Power7400 W
Boost FunctionYes
Residual Heat IndicatorYes
TimerYes
Power ManagementYes
Installation TypeBuilt-in
Safety FeaturesChild Lock
Dimensions (WxD)590 x 520 mm
Depth52 cm

Related product manuals