EasyManua.ls Logo

Gorenje IT640BCSC - User Manual

Gorenje IT640BCSC
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.gorenje.com
DETAILED
INSTRUCTIONS
FOR USE OF GLASS
CERAMIC BUILT-IN
INDUCTION COOKING
HOB
GB IE MT
718031_en.indd 1718031_en.indd 1 23. 12. 2021 07:59:3423. 12. 2021 07:59:34

Questions and Answers

  • Z
    zboydAug 7, 2025
    What to do if my Gorenje Hob is beeping and showing flashing dashes?
    • A
      ashleystevenAug 7, 2025
      If your Gorenje Hob is beeping continuously and the display shows flashing dashes, it usually means that water has spilled over the sensor surface or an object is placed over the sensors. To resolve this, simply wipe the sensor surface clean.
  • N
    Norman LeeAug 11, 2025
    Why is my Gorenje IT640BCSC fan still running after I turn it off?
    • J
      John ThomasAug 11, 2025
      The fan in your Gorenje hob may continue to operate even after it has been switched off. This is because the induction electronic components require temperature control, and the fan will run until the temperature decreases to an acceptable level.
  • T
    Thomas RussellAug 15, 2025
    What does 'F' on the display of my Gorenje Hob mean and what should I do?
    • R
      Ronald RowlandAug 15, 2025
      The 'F' on the display of your Gorenje hob indicates an operational error. To fix this, disconnect the hob from the power mains for a few minutes by either undoing the fuse or switching off the main switch. Then, reconnect the hob to the power mains and switch it back on.
  • S
    Shane GoldenAug 19, 2025
    Why does my Gorenje IT640BCSC Hob make a buzzing sound?
    • A
      Andres MillerAug 19, 2025
      A transformer-like buzzing sound from your Gorenje hob typically occurs when cooking at a high power level. This noise should disappear or weaken when you reduce the power level.
  • B
    Bradley HillAug 23, 2025
    What does the 'C' on the display of my Gorenje IT640BCSC mean?
    • L
      Laurie ReedAug 25, 2025
      The 'C' on the display of your Gorenje hob indicates that the cooking zone has overheated. You should wait for the cooking zone to cool down.
  • P
    Phillip PatrickAug 28, 2025
    Why is my Gorenje IT640BCSC making noise?
    • S
      Samantha FloresAug 28, 2025
      The noise your Gorenje hob is making is due to the induction technology. This technology relies on the properties of some metals under electromagnetic effect. This is normal operation, and not a malfunction.
  • J
    Jill TurnerSep 1, 2025
    Why is my cookware vibrating and crackling on my Gorenje Hob?
    • A
      Adam SmithSep 1, 2025
      The vibration and crackling noises from cookware on your Gorenje hob usually appear in pots or pans made of different materials. It results from vibrations along the adjacent surfaces of different material layers and depends on the cookware, as well as the amount and type of food being cooked.

Gorenje IT640BCSC Specifications

General IconGeneral
TypeInduction Hob
Number of Cooking Zones4
Control TypeTouch Control
Width60 cm
ColorBlack
Total Power7400 W
Boost FunctionYes
Residual Heat IndicatorYes
TimerYes
Safety FeaturesChild lock
Dimensions (W x D x H)590 x 520 x 60 mm

Related product manuals