What to do if Gorenje Hob displays 'F'?
If the Gorenje Hob displays an 'F', it means an error occurred during operation. To resolve this, disconnect the hob from the power mains for a few minutes by undoing the fuse or switching off the main switch. Then, reconnect the hob to the power mains and switch it back on.
Why Gorenje IT640WSC beeps continuously?
If you see a continuous beep and »–« flashing on the display of your Gorenje Hob, it is likely due to water spillage over the sensor surface or an object placed on the sensors. To fix this, simply wipe the sensor surface clean.
What to do if Gorenje Hob displays 'C'?
If the Gorenje Hob display shows a »C«, it means the cooking zone has overheated. You should wait for the cooking zone to cool down before using it again.
Why my Gorenje IT640WSC Hob makes a buzzing sound?
A transformer-like buzz from your Gorenje hob typically occurs when cooking at a high power level. This is due to the amount of energy being transferred to the pot or pan. The noise should decrease or disappear when you reduce the power level.
Why Gorenje IT640WSC Hob fan still running after turning off?
The fan noise from your Gorenje hob may continue even after it has been switched off. This happens if the temperature remains too high.
Why is my cookware vibrating on my Gorenje Hob?
Vibration and crackling noises from cookware on your Gorenje hob can occur if the pots or pans are made of different materials. This results from vibrations along the adjacent surfaces of those materials. The noise can vary depending on the cookware, and the amount and type of food being cooked.
Why my Gorenje Hob makes induction generated operating noise?
This is a normal operating noise for induction Gorenje Hobs and not a malfunction.
What does 'r' on the display mean on Gorenje IT640WSC Hob?
This indicates that the desired power level cannot be set because the limit for maximum total Gorenje Hob power has been activated.
Explanation of how induction heating technology works and its efficiency.
Using the high-power boost function for faster cooking.
Activating and deactivating the child lock for safety.
Setting and managing cooking timers for individual zones.
Adjusting the hob's overall power consumption limit.
Steps for integrating the hob flush with the countertop surface.
To Next Page
General
