What does error E6 mean on my Gorenje Washer?
If your Gorenje Washer displays error code E6, it means the program temperature was not reached. This could be due to a heater failure, in which case you should turn off the appliance and wait a few seconds before turning it back on and repeating the washing program. It could also mean that the inlet water is too cold or that water was manually added.
How to get rid of the unpleasant smell in Gorenje Washer drum?
If there's an unpleasant smell in your Gorenje Washer drum, it could be due to remains of fabrics, washing agent, and softener in the filter. Check whether the filter is clean. It may also be caused by the development of germs. Run the auto-clean (SterilTub) program.
Why is softener not rinsed completely in my Gorenje Washer?
If softener is not completely rinsed or water is left in the dispenser dish of your Gorenje Washer, the sucking cover is not correctly positioned or is clogged. Clean the dispenser and firmly fix the cover to its place.
Why do greasy wads appear on laundry after washing in my Gorenje Washer?
If greasy wads appear on your laundry after washing in your Gorenje Washer, it's likely due to using too little detergent, especially if the laundry was very greasy. Wash the laundry again, adding more detergent for such soiled laundry, or use liquid detergent.
Why is my laundry stained after washing in my Gorenje Washer?
If your laundry is stained after washing in your Gorenje Washer, it could be because you used liquid detergent or detergent for colored laundry that does not contain whitener. Use a detergent containing whitener. It could also be that an unsuitable program was selected. Use special stain removers.
Why are there white powdery residues on my Gorenje Washer laundry?
If you notice white powdery residues on your laundry after washing in your Gorenje Washer, it's likely due to neo-phosphate detergents containing non-soluble components (zeolites) for water softening. These substances may deposit on the laundry. Immediately rinse the laundry once again. Use liquid detergents which do not contain zeolites. You can also try removing the residues with a brush.
Why are there detergent residues in my Gorenje Washer dispenser?
Detergent residues in the dispenser of your Gorenje Washer could be due to low water flow pressure. Some detergents may stick to the dispenser, especially if it is wet. To resolve this, clean the inlet pipe filter net and wipe the dispenser prior to loading detergent.
Why is my Gorenje W7543LC laundry not properly spun?
If your Gorenje Washer laundry is not properly spun and no failure is reported, it's possible that the machine switched on the UKS function. This happens when the machine detects a bad laundry balance and automatically reduces the spin RPM. The machine is operating normally. To resolve this, wash large and small pieces of laundry together.
What to do if Gorenje W7543LC E2 error appears?
If your Gorenje Washer displays error E2, it means the washing program does not start. This is likely because the door is open or not properly closed. Close the door by pushing it towards the machine and push START again.
Why is my Gorenje Washer leaking water?
If your Gorenje Washer is leaking, it could be due to several reasons: the filter might not be tightly screwed in, so tighten it properly. The inlet pipe might not be tightly screwed to the machine or the water faucet, so ensure it is tightened. Finally, the outlet pipe might have fallen to the floor; if so, affix the outlet pipe to the drain.
Description of the main selector dial and keys for choosing washing styles like ECOcare, ALERGYcare, TIMEcare.
Explanation of the washing temperature key and signal lights for selected temperatures.
Controls for adjusting spin speed, setting start delay, and selecting additional functions like Prewash, SterilTub.
The key used to start or stop the washing program, with its indicator light behavior.
Important safety instructions regarding machine operation, installation, and environment.
Specific safety advice and precautions to follow before connecting the washing machine to power and water.
Step-by-step guide to safely remove transport brackets before initial use.
Instructions for safely connecting the washing machine to the main power supply.
Instructions on how to select a washing programme using the main selector dial.
Guide to adjusting washing style, temperature, and other settings for optimal results.
Table detailing common washing machine failures, their possible causes, and solutions.
To Next Page
General
