Gorenje W7223UK - User Manual

Questions and Answers

E
Eric WardSep 3, 2025
Why are there white powdery residues on my laundry after washing in my Gorenje Washer?
- J
  jenniferkimSep 4, 2025
  If you notice white powdery residues on your laundry after washing in your Gorenje Washer, this is likely due to neo-phosphate detergents that contain non-soluble components (zeolites) for water softening. These substances can deposit on the laundry. Immediately rinse the laundry again. Consider using liquid detergents that do not contain zeolites, and try removing the residues with a brush.
V
Vanessa EdwardsSep 18, 2025
What does ERROR7 mean on my Gorenje Washer?
- A
  Anthony BrownSep 18, 2025
  If ERROR7 appears on your Gorenje Washer, it indicates that water is poorly pumped out or not at all. Check if the filter is clean, the outlet pipe is not jammed, the drain is clogged, and the outlet pipe is positioned higher than 1m. Push START again.
S
sgilmoreSep 16, 2025
What does ERROR6 mean on my Gorenje Washer?
- M
  masseyjackSep 16, 2025
  If ERROR6 appears on your Gorenje Washer, it indicates that the program temperature has not been reached. This could be due to heater failure, inlet water being too cold, or manual addition of water. Turn off the appliance and wait for a few seconds.
S
Susan WelchSep 14, 2025
What to do if ERROR3 appears on my Gorenje Washer?
- R
  Richard MartinezSep 14, 2025
  If ERROR3 appears on your Gorenje Washer, it means water is not being supplied to the machine. Check if the water tap is open and that the inlet pipe net filter is clean. Push the START button again.
T
Tracy ArcherSep 12, 2025
What to do if ERROR2 appears on my Gorenje Washer?
- J
  Justin Garner DVMSep 12, 2025
  If the ERROR2 appears and washing program does not start on your Gorenje Washer, the door may be open or not properly closed. Close the door by pushing it towards the machine and push START again.
R
Rodney DennisSep 12, 2025
Why is the washing time longer than usual on my Gorenje W7223UK Washer?
- E
  Edwin WellsSep 12, 2025
  If the washing time is longer than usual on your Gorenje Washer, and the time indicated on the display is corrected during the washing cycle, it could be due to several reasons: low temperature of inlet water, the machine activating the UKS system because of uneven laundry load, low mains voltage, or a failure in the power supply. The washing program time may be up to 60% longer; however, this does not indicate a fault in the machine.
A
Andrea SmithSep 9, 2025
Why is there an unpleasant smell in my Gorenje Washer drum?
- E
  Erin DunnSep 9, 2025
  If there is an unpleasant smell in the washing machine drum of your Gorenje Washer, it could be due to remains of fabrics, washing agent, and softener in the filter. Check whether the filter is clean. It may also be caused by the development of germs. Run the auto-clean (SterilTub) program.
T
Timothy LaraSep 7, 2025
Why is softener not completely rinsed in my Gorenje W7223UK Washer?
- C
  Christine WadeSep 7, 2025
  If the softener is not completely rinsed or water is left in the dispenser dish of your Gorenje Washer, the sucking cover may not be correctly positioned or is clogged. Clean the dispenser and firmly fix the cover to its place.
D
Dwayne WilsonSep 5, 2025
Why are there detergent residues in the dispenser of my Gorenje W7223UK?
- B
  Brian FloresSep 5, 2025
  If you find detergent residues in the dispenser of your Gorenje Washer, it may be due to low water flow pressure. Some detergents can stick to the dispenser if it is wet. Clean the inlet pipe filter net and wipe the dispenser before loading detergent.
C
Casey AvilaAug 20, 2025
How to troubleshoot a Gorenje W7223UK that won't turn on?
- A
  Anita SandersAug 20, 2025
  If your Gorenje Washer doesn't work, start by checking the power supply. Ensure that the plug is correctly inserted into the socket, that there is power in the socket, and that the fuse is in working order.