To Next Page
J
Jessica MccallSep 8, 2025
What to do if my Gorenje WEI823 shows error E0?
- RRuben HaasSep 8, 2025
If your Gorenje Washer displays error E0, restart the program. If the error happens again, call a service technician.
What to do if my Gorenje WEI823 shows error E0?
If your Gorenje Washer displays error E0, restart the program. If the error happens again, call a service technician.
What to do if my Gorenje Washer has a water drain system alert?
If your Gorenje Washer has a water drain system alert, check if the pump filter is clean, the discharge hose is not clogged, and the drain is not clogged. Also, check if the discharge hose is placed below the maximum and above the minimum height.
What to do if my Gorenje WEI823 display unit and all buttons are unresponsive?
If the display unit and all buttons are unresponsive, try manually stopping the program by pressing and holding the ON/OFF/RESET button for more than 3 seconds. Then, unplug the power cord from the outlet, plug it back in, and switch on the washing machine. If the error continues, it is recommended to call a service technician.
What to do if my Gorenje WEI823 shows error E3?
If your Gorenje Washer shows error E3, check if the water inlet valve is open, the filter on the water supply hose is clean, the water supply hose isn't deformed, and the water pressure is between 0.05 and 0.8 MPa (0.5–8 bar). Then, press the START/PAUSE button to resume the program. If the error continues, contact a service technician.
What to do if my Gorenje WEI823 Washer shows error E7?
If your Gorenje Washer displays error E7, check if the pump filter is clean, the discharge hose is not clogged, and the drain is not clogged. Also, make sure the discharge hose is placed at the correct height. Then, press the START/PAUSE button again. If the error continues, contact a service technician.
What to do if my Gorenje WEI823 Washer has unevenly distributed laundry?
If the laundry is unevenly distributed in your Gorenje Washer, manually distribute the laundry and run the spinning program.
What to do if my Gorenje Washer shows error E9?
If your Gorenje Washer displays error E9, turn the appliance off and then back on. If the error happens again, call a service technician.
What to do if my Gorenje WEI823 Washer shows error E12?
If your Gorenje Washer displays error E12, restart the program. If the error happens again, call a service technician.
What to do if my Gorenje WEI823 Washer shows error E23?
If your Gorenje Washer displays error E23, turn it off and then back on. If the error continues, contact a service technician.
What to do if my Gorenje WEI823 shows error E10?
If your Gorenje Washer displays error E10, unplug the power cord from the outlet, plug it back in, and switch on the washing machine. If the error continues, contact a service technician.
Safety guidelines for children interacting with the appliance.
Warning about potential burns from hot surfaces.
Explanation of the system preventing water overflow.
Detailed technical data and specifications of the washing machine.
Explanation of the washing machine's control panel and buttons.
Instructions for removing transport rods before first use.
Procedure for levelling the washing machine using its adjustable feet.
How to connect the water supply hose to the machine.
Instructions for connecting the washing machine to the electrical power.
Guide to understanding laundry care labels for washing.
How to sort and prepare laundry before washing.
How to select a washing programme using the selector knob.
How to adjust programme settings and washing modes.
Explanation of spin settings, draining, and pump stop options.
How to activate and deactivate the child lock feature.
How to set a delayed start for washing programmes.
How to activate additional functions like WATER+ and PREWASH.
Using the WATER+ function for more water and rinses.
Using the PREWASH function for heavily soiled laundry.
How to start the selected washing programme.
How to stop, cancel, or change a running programme.
What happens at the end of a wash cycle and post-cycle actions.
How to manually stop and cancel a washing programme.
How to pause and resume a washing programme.
Steps to clean the detergent dispenser tray.
Step-by-step guide to cleaning the pump filter.
General guidance on handling washing machine errors and issues.
A table listing error codes and their solutions.
Methods for removing various types of stains from laundry.
General| Door hinge | Left |
|---|---|
| Drum volume | 54 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | No |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Cycle time (max) | 210 min |
| AquaStop function | - |
| Residual moisture | 55 % |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
| Cycle time (quick washing program) | 20 min |
| Current | 10 A |
| Connected load | 2000 W |
| Power consumption (standby) | 0.3 W |
| Energy consumption washing per cycle | 0.9 kWh |
| Annual water consumption washing | 10309 L |
| Annual energy consumption washing | 185 kWh |
| Package depth | 627 mm |
| Package width | 640 mm |
| Package height | 910 mm |
| Package weight | 67900 g |
Weight and Dimensions| Depth | 545 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 66300 g |
