Why is my Gorenje W8544PB Washer leaking water?
If your Gorenje Washer is leaking, it could be due to several reasons: the filter might not be tightly screwed in, so tighten it properly. The inlet pipe might not be tightly screwed to the machine or the water faucet, so ensure it is tightened. Finally, the outlet pipe might have fallen to the floor; if so, affix the outlet pipe to the drain.
How to fix Gorenje Washer when the display is not lit?
If the display of your Gorenje Washer is not lit, it means the machine is not powered. Check if there is power in the socket, the fuse is OK, and the plug is properly inserted into the socket.
Why does my Gorenje Washer move during operation?
If your Gorenje Washer moves during operation, it could be because the machine is not properly leveled. Use the adjustable legs to level the machine. Alternatively, the transport brackets might not be removed; make sure to remove them.
What to do if my Gorenje W8544PB Washer shows error E7?
If your Gorenje Washer displays error code E7, it indicates that water is poorly pumped out or not at all. Check if the filter is clean, the outlet pipe is not jammed, the drain is not clogged, and the outlet pipe is not positioned higher than 1 meter. Then, push START again.
How to fix Gorenje Washer error E3?
If your Gorenje Washer shows error E3, it means water is not being supplied to the machine. Check if the water tap is open and if the inlet pipe net filter is clean. Also, push the START button.
Why is my Gorenje Washer vibrating during the spin cycle?
If your Gorenje Washer vibrates during the spin cycle, it's likely due to unevenly distributed laundry, especially with very small loads. This is normal; the machine will reduce the RPM if vibrations are too strong. Try washing a larger quantity of laundry.
Why is the Gorenje W8544PB Washer washing time longer than usual?
If the washing time on your Gorenje Washer is longer than usual, it could be due to several reasons. The inlet water might be at a low temperature. The machine may have switched on the UKS system because of an uneven laundry load. There could be low mains voltage. Also, a failure in the power supply could cause this issue. Note that additional rinses may prolong the washing program time.
How to prevent excessive foaming in my Gorenje W8544PB Washer?
To prevent excessive foaming during washing in your Gorenje Washer, use washing powder according to the instructions provided by the producer, considering water hardness and how soiled the laundry is. Ensure you are using only detergents specifically designed for machine washing.
What does error E6 mean on my Gorenje W8544PB?
If your Gorenje Washer displays error code E6, it means the program temperature was not reached. This could be due to a heater failure, in which case you should turn off the appliance and wait a few seconds before turning it back on and repeating the washing program. It could also mean that the inlet water is too cold or that water was manually added.
What to do if Gorenje Washer E2 error appears?
If your Gorenje Washer displays error E2, it means the washing program does not start. This is likely because the door is open or not properly closed. Close the door by pushing it towards the machine and push START again.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Loading type | Front load |
| Capacity | 8 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 RPM |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Product colour | White |
| Built-in display | Yes |
| Door hinge | Left |
| Drum material | Stainless steel |
| Spin-drying class | B |
| Washing class | A |
| Number of washing programs | 23 |
| Delayed start timer | Yes |
| Delay start (max) | 24 hours |
| Noise Level (Spin) | 74 dB |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page
