What does ERROR6 mean on my Gorenje w7223 Washer?
If your Gorenje Washer displays ERROR6 and the program temperature is not reached, turn off the appliance and wait a few seconds. Then, turn it back on and repeat the washing program. If the failure persists, call a service technician.
Why is the washing time longer than usual on my Gorenje Washer?
If the washing time is longer than usual on your Gorenje Washer, this can be due to several reasons. A low temperature of the inlet water, the machine switching on the UKS system because of uneven laundry load, low mains voltage, or a failure in the power supply can all extend the washing time. Note that a low inlet water temperature may increase washing program time by up to 60%, but this does not indicate a fault in the machine.
Why is there an unpleasant smell in my Gorenje w7223 Washer drum?
If there's an unpleasant smell in the washing machine drum of your Gorenje Washer, it could be due to remains of fabrics, washing agent, and softener in the filter. Check if the filter is clean. Also, it could be caused by the development of germs. Run the auto-clean (SterilTub) program.
Why is softener not completely rinsed in my Gorenje w7223?
If softener is not completely rinsed or water is left in the dispenser dish of your Gorenje Washer, the sucking cover might not be correctly positioned or could be clogged. Clean the dispenser and firmly fix the cover to its place.
Why are there detergent residues in the dispenser of my Gorenje w7223 Washer?
If you find detergent residues in the dispenser of your Gorenje Washer, it could be due to low water flow pressure. Try cleaning the inlet pipe filter net. Some detergents may also stick to the dispenser if it is wet, so wipe the dispenser before loading detergent.
Why are there white powdery residues on my laundry after washing in my Gorenje Washer?
If you see white powdery residues on your laundry after washing in your Gorenje Washer, it's likely due to neo-phosphate detergents containing non-soluble components (zeolites) for water softening. These substances can deposit on the laundry. Immediately rinse the laundry again. Also, use liquid detergents which do not contain zeolites. You may also try removing the residues with a brush.
Why is my laundry stained after washing in my Gorenje w7223 Washer?
If laundry is stained after washing in your Gorenje Washer, it may be because you used liquid detergent or detergent for colored laundry without whitener. Try using a detergent containing whitener. Also, unsuitable program selection can cause stains, so use special stain removers.
Why are there greasy wads on my laundry after washing in my Gorenje w7223?
If you notice greasy wads on your laundry after washing with your Gorenje Washer, it could be due to using too little detergent, especially if the laundry was very greasy. Wash the laundry again, using more detergent or switching to a liquid detergent.
Why is my Gorenje w7223 not spinning properly?
If your laundry isn't spun properly in your Gorenje Washer and no failure is reported, the machine might have activated the UKS function due to bad laundry balance, which automatically reduces spin RPM. To resolve this, wash large and small pieces of laundry together.
How to troubleshoot a Gorenje w7223 Washer that won't turn on?
If your Gorenje Washer isn't working, make sure it's getting power. Check that the plug is correctly inserted into the socket, there is power in the socket, and the fuse is in working order.
Instructions for removing transport brackets before initial use.
Guide to understanding laundry care symbols and labels.
Guide to selecting the appropriate wash program for your laundry.
How to change and select program settings and washing styles.
Details on activating extra functions like Prewash, Extra Water, SterilTub, and Child Lock.
Detailed guide on how to clean the washing machine's filter.
Guidance on identifying and resolving common machine errors and issues.
To Next Page
General
