How to stop my Gorenje W8624H from moving?
If your Gorenje Washer is moving excessively during operation, level it using the adjustable legs. Also, make sure you have removed the transport brackets.
What to do if my Gorenje W8624H shows ERR 03?
If your Gorenje Washer displays 'ERR 03' and isn't filling with water, first ensure the water tap is fully open. Also, check if the inlet pipe net filter is clean. After checking these, press the START button again.
Why is my Gorenje W8624H leaking?
If your Gorenje Washer is leaking water, ensure the filter is tightly screwed in. Also, check that the inlet pipe is securely connected to both the machine and the water faucet. Finally, make sure the outlet pipe is properly affixed to the drain.
What to do if Gorenje W8624H shows ERR 07?
If your Gorenje Washer displays 'ERR 07', indicating poor or no water pump-out, check if the filter is clean. Also, ensure the outlet pipe isn't jammed, the drain isn't clogged, and the outlet pipe is positioned no higher than 1 meter. Then, push START again.
What to do if Gorenje W8624H Washer shows ERR 02?
If your Gorenje Washer displays 'ERR 02' and the washing program won't start with a flashing washing time, make sure the door is properly closed by pushing it firmly towards the machine. Then, press START again.
Why are there detergent residues in my Gorenje Washer dispenser?
If you see detergent residues in the dispenser of your Gorenje Washer, try cleaning the inlet pipe filter net if the water flow pressure is low. Also, wipe the dispenser before adding detergent, as some detergents tend to stick when the dispenser is wet.
How to fix Gorenje W8624H Washer when the display is not lit?
If your Gorenje Washer's display isn't lit and the machine isn't working, check the following: ensure there is power in the socket, verify the fuse is OK, and confirm the plug is properly inserted into the socket.
Why is my Gorenje W8624H Washer vibrating during spin?
If your Gorenje Washer is vibrating excessively during the spin cycle, especially with small loads, this is normal. The machine will reduce the RPM if vibrations are too strong. Consider washing larger quantities of laundry.
Why is softener not rinsed in my Gorenje W8624H Washer?
If the softener isn't completely rinsed or water remains in the dispenser dish of your Gorenje Washer, clean the dispenser and firmly fix the cover to its place, ensuring the sucking cover is correctly positioned and not clogged.
Why is my Gorenje Washer foaming too much?
If your Gorenje Washer is producing excessive foam during washing, it's likely due to using too much detergent. Follow the detergent producer's instructions, considering water hardness and how soiled the laundry is. Use only detergents specifically for machine washing.
General| Appliance placement | Freestanding |
|---|---|
| Loading type | Front-load |
| Colour of product | White |
| Built-in display | Yes |
| Door hinge | Left |
| Drum material | Stainless steel |
| Maximum spin speed | 1200 RPM |
| Spin-drying class | B |
| Washing class | A |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Energy efficiency class | A+++ |
| Noise Level (Washing) | 56 dB |
| Width | 600 mm |
| Height | 85 cm |
To Next Page
