Why is softener not completely rinsed in my Gorenje W7223UK Washer?
If the softener is not completely rinsed or water is left in the dispenser dish of your Gorenje Washer, the sucking cover may not be correctly positioned or is clogged. Clean the dispenser and firmly fix the cover to its place.
Why is there an unpleasant smell in my Gorenje Washer drum?
If there is an unpleasant smell in the washing machine drum of your Gorenje Washer, it could be due to remains of fabrics, washing agent, and softener in the filter. Check whether the filter is clean. It may also be caused by the development of germs. Run the auto-clean (SterilTub) program.
Why is the washing time longer than usual on my Gorenje W7223UK Washer?
If the washing time is longer than usual on your Gorenje Washer, and the time indicated on the display is corrected during the washing cycle, it could be due to several reasons: low temperature of inlet water, the machine activating the UKS system because of uneven laundry load, low mains voltage, or a failure in the power supply. The washing program time may be up to 60% longer; however, this does not indicate a fault in the machine.
What to do if ERROR2 appears on my Gorenje Washer?
If the ERROR2 appears and washing program does not start on your Gorenje Washer, the door may be open or not properly closed. Close the door by pushing it towards the machine and push START again.
General| Type | Freestanding |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 RPM |
| Energy Efficiency Class | A+++ |
| Noise Level (Washing) | 56 dB |
To Next Page
