How to troubleshoot a Gorenje Washer that won't turn on?
If your Gorenje Washer isn't working and the indicator LEDs are off, the issue might be a lack of power. Please check if the socket has power, the fuse is working correctly, and the plug is properly inserted into the socket.
Why does my Gorenje WA614SYW Washer vibrate so much during spinning?
If your Gorenje Washer vibrates excessively during the spin cycle, especially with small loads, it's likely due to unevenly distributed laundry. This is normal. The machine will automatically reduce the spin speed if vibrations are too strong. Try washing a larger quantity of laundry.
What to do if my Gorenje WA614SYW Washer is leaking water?
If water is leaking from your Gorenje Washer, make sure the filter is tightly screwed in. Also, check that the inlet pipe is securely connected to both the machine and the water faucet. Ensure the outlet pipe is properly affixed to the drain.
Why is my Gorenje WA614SYW Washer moving during the cycle?
If your Gorenje Washer moves during operation, it may not be properly leveled or the transport brackets haven't been removed. Level the machine using the adjustable legs and ensure that all transport brackets are removed.
Why is my Gorenje Washer producing too much foam?
If you notice excessive foaming during washing in your Gorenje Washer, you may be using too much detergent. Use washing powder according to the manufacturer's instructions, considering the water hardness and how soiled the laundry is. Also, only use detergents specifically designed for machine washing.
Why isn't my Gorenje WA614SYW Washer spinning clothes properly?
If your laundry isn't properly spun in your Gorenje Washer but no failure is reported, the machine may have activated the UKS function. This means the machine automatically reduced the spin RPM due to bad laundry balance. The machine is operating normally. Try washing large and small pieces of laundry together in the future.
Why are there greasy clumps on my laundry after washing in my Gorenje Washer?
If you find greasy wads on your laundry after washing in your Gorenje Washer, it could be due to using too little detergent, especially if the laundry was very greasy. Wash the laundry again, using more detergent for heavily soiled items, or consider using a liquid detergent.
Why does my laundry have stains after washing in my Gorenje WA614SYW Washer?
If your laundry is stained after washing in your Gorenje Washer, it may be because you used liquid detergent or detergent for colored laundry that doesn't contain whitener. Try using a detergent that contains whitener.
Why is there white residue on my clothes after washing in my Gorenje WA614SYW?
If you notice white powdery residues on your laundry after washing in your Gorenje Washer, it's likely due to neo-phosphate detergents containing non-soluble components (zeolites) for water softening. These substances can deposit on the laundry. Immediately rinse the laundry again. Use liquid detergents that don't contain zeolites, or try removing the residues with a brush.
Why is there detergent left in the dispenser of my Gorenje Washer?
If you find detergent residues in the dispenser of your Gorenje Washer, it could be due to low water flow pressure or some detergents sticking to a wet dispenser. Clean the inlet pipe filter net. If the water pressure is low, increase the water level. Wipe the dispenser before adding detergent.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Product colour | White |
| Capacity | 6 kg |
| Maximum spin speed | 1400 RPM |
| Spin-drying class | B |
| Washing class | A |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Energy Efficiency Class | A |
| Noise Level (Washing) | 56 dB |
| Width | 60 cm |
| Height | 85 cm |
| Programs | Cotton, Delicate, Wool, Quick |
Provides detailed specifications and dimensions for different washing machine models.
Instructions for safely unpacking and removing shipping restraints.
Guidance on connecting water inlet/outlet and power supply.
Overview of the control panel, knobs, buttons, and display.
Step-by-step wash guide and explanation of basic programs.
Using special programs, display features, delayed start, and spin control.
Details on conditioning, spinning, adding agents, and starting the wash.
Explains how faults are signaled by display messages and flashing LEDs.
Addresses how external factors can cause apparent machine faults.
Details on basic programs, load capacity, temperature, and consumption.
Overview of available additional functions for programs.
To Next Page