Why is softener left in the dispenser of my Gorenje WA614SYW?
If the softener isn't completely rinsed or water remains in the dispenser dish of your Gorenje Washer, the sucking cover may not be correctly positioned or is clogged. Clean the dispenser and firmly fix the cover in its place.
How do I get rid of a bad smell in my Gorenje WA614SYW?
If you notice an unpleasant smell in the drum of your Gorenje Washer, it may be due to remains of fabrics, washing agent, and softener in the filter or the development of germs. Check if the filter is clean. Run the auto-clean (SterilTub) program.
Why does my Gorenje WA614SYW Washer take so long to wash?
If the washing time is longer than usual on your Gorenje Washer, it could be due to several factors: low temperature of the inlet water, unevenly distributed load causing the machine to activate the UKS, low mains voltage, or a failure in the power supply. The washing program time may be up to 60% longer, but this doesn't necessarily indicate a fault. Also, washing time is extended by any power supply downtime.
What does FAILURE 1 mean on my Gorenje WA614SYW Washer?
If your Gorenje Washer displays FAILURE 1 and the program temperature isn't reached, the temperature sensor may be disconnected from the electronic circuit. Turn off the appliance, wait a few seconds, then turn it back on and repeat the washing program. If the failure is reported again, call a service technician.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Product colour | White |
| Capacity | 6 kg |
| Maximum spin speed | 1400 RPM |
| Spin-drying class | B |
| Washing class | A |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Energy Efficiency Class | A |
| Noise Level (Washing) | 56 dB |
| Width | 60 cm |
| Height | 85 cm |
| Programs | Cotton, Delicate, Wool, Quick |
Provides detailed specifications and dimensions for different washing machine models.
Instructions for safely unpacking and removing shipping restraints.
Guidance on connecting water inlet/outlet and power supply.
Overview of the control panel, knobs, buttons, and display.
Step-by-step wash guide and explanation of basic programs.
Using special programs, display features, delayed start, and spin control.
Details on conditioning, spinning, adding agents, and starting the wash.
Explains how faults are signaled by display messages and flashing LEDs.
Addresses how external factors can cause apparent machine faults.
Details on basic programs, load capacity, temperature, and consumption.
Overview of available additional functions for programs.
To Next Page