Gorilla 7007 User Manual

2-way Pager Antenna Installation
STEP 1
Mounting the antenna module.
Find a secure place on the motorcycle where you can mount the 2-way antenna
module using hook and loop strips. The most common area for installation are:
The antenna module must be installed in a locationthat should not become wet.
Step 2
Route the 2-way antenna wire to the alarm unit while
keeping the wire hidden and secure.
Step 3
Connect the black 3-pin plug from the antenna wire to
the matching black 3-pin plug on the alarm unit.
1
2
3
4
1
2
3
4
Section 2
Programming the 2-way Pager System
12
To Alarm module
The Gorilla Cycle Alarm with 2-way Pager System (part # 7017) is serious protection for
those that want the ability to keep track of their motorcycle’s security at all times.With the
2-way pager, every function of the alarm can be monitored on the pager’s LED screen from
up to 1/2 mile away
*
. Each alarm unit can accommodate up to 3 pagers and can be
purchased separately.
*
If the system is interrupted by strong radio frequency, high voltage electrical power or obstacles
like tall buildings, the transmission range may be shorten.
WITHIN TAIL SECTION
BEHIND SIDE COVERS
UNDER SEAT
WITHIN FAIRING
2-way antenna
module

Gorilla 7007 Specifications

General

Brand	Gorilla
Model	7007
Category	Security System
Language	English