24
Schedule2 - Service Checklist
NOTE: Many instructions for adjustments can be found in the assembly portion
of this manual.
Frequency Task
Before every ride
After every ride
Monthly
check wheel and pedal tightness
check tire pressure
check brake operation
check wheels for loose spokes, loose axle nuts or quick release
make sure all fasteners are tightened securely
lubrication as per schedule 1
check derailleur adjustment
check brake adjustment
check brake and gear cable adjustment
check tire wear and pressure
check wheels are true and spokes tight
check hub, head set and crank bearings for looseness
quick wipe down with damp cloth
lubrication as per schedule 1
check pedals are tight
check handlebars are tight
check seat and seat post are tight and comfortably adjusted
check frame and fork for trueness
Note: The frequency of maintenance should increase with use in wet or dusty
conditions. Do not over lubricate-remove excess lubricant to prevent dirt
build up. Never use a degreaser to lubricate your chain (WD-40T™)
Weekly
To Next Page
Loading...
Need help?
General
