Need help?Do you have a question about the Gotrax XR Ultra and is the answer not in the manual?
Always wear a helmet, check battery, obey laws, avoid impairment, and respect pedestrians.
Avoid water, abuse, and modification; heed age/speed limits and safety checks.
Follow the detailed steps for unfolding the tiller, connecting the console, and securing components.
The Gotrax XR Ultra is an electric scooter designed for personal transportation, offering a convenient and eco-friendly way to get around. This user manual provides comprehensive instructions for assembling, operating, and maintaining the scooter, ensuring a safe and enjoyable riding experience.
The Gotrax XR Ultra electric scooter is built for urban commuting and recreational use. It features a robust design with a focus on safety and user-friendliness. The scooter is powered by an electric motor, allowing riders to travel without manual effort once propelled. It incorporates a braking system for controlled stopping and a console that displays essential riding information. The scooter is also designed with a folding mechanism, making it easy to store and transport when not in use.
Before riding the Gotrax XR Ultra, it is crucial to read and understand all the information provided in the manual. For riders under 18 years of age, parental permission is required. Safety is paramount, and riders are advised to always wear a helmet. Before each ride, ensure the scooter has a full battery. Riders should be aware of local laws and follow them, and never ride the scooter under the influence of drugs or alcohol. Respect for pedestrians is also emphasized. It is important to avoid riding in wet conditions, as this can cause the scooter to slide, leading to injury, and may also damage the electronics, voiding the warranty.
The scooter is not waterproof, and water damage is not covered by the warranty. Riding in wet conditions is dangerous and can result in injury. Physical damage due to negligent care or extreme riding is not covered. Riding the scooter carries a risk of severe injury or even death from loss of control, collisions, and falls, so caution is advised. Modifying the product from its original design will void the warranty. Always keep hands and all body parts away from moving parts during operation.
Before each ride, a thorough check of the scooter is recommended to ensure it is operating correctly. Verify that the braking system is functioning properly and that all safety labels are in place and understood. Ensure that all axle guards, chain guards, or other covers and guards supplied by the manufacturer are in place and in serviceable condition. Check that the tires are in good condition, properly inflated, and have sufficient tread remaining. The scooter has a maximum load rating of 220 lb (100 kg). It should not be used by children under the age of 13. The maximum speed of the electric scooter is 15.5 mph.
To assemble the scooter, first, press down on the rear fender, separate the folding hook and fender buckle, and then lift the tiller upright until it locks into position. Verify the lock by gently attempting to fold it. Next, use an Allen wrench to loosen and detach the screws located at the hook. Remove the hook and screws, then remove the cover from the top of the tiller. Place the console into the top of the tiller. Take the cord attached to the hook and bring it to the front of the tiller. Pull the handbrake towards you and insert the round metal piece into the opening. String the small silver cord through the solid piece of the handbrake, ensuring the metal piece on the red cord is fully pushed into the handbrake. Finally, grab the red cord and hook, bring it back behind the tiller, and reattach the hook to the back of the tiller using the screws and an Allen wrench. The red cord should go around the tiller.
Before using the scooter, it must be fully charged. Open the rubber charging port cover and insert the charging plug into the port. The charger box will display a red light when charging and a green light when fully charged. Once charging is complete, cover the charging port to protect it from dust and debris. The charging time is approximately 4 hours. It is important to charge the scooter in conditions where the temperature does not exceed 104 degrees Fahrenheit or fall below 32 degrees Fahrenheit.
To power the scooter on, press and hold the red button for 1 second. To power it off, press and hold the red button for 5 seconds. To turn the headlight on or off, press the red button for 1 second while the scooter is powered on. The console displays speed in MPH, battery life, and headlight status.
For riding, place one foot on the platform and the other on the ground. Push off with the foot on the ground and simultaneously press the throttle button to initiate movement. To slow down or stop, press the handbrake. The scooter performs best on smooth surfaces such as parks, smooth roads, footpaths, and bike lanes. Avoid pressing the throttle while walking alongside the scooter. Be aware of the terrain and watch out for curbs and obstacles. The scooter features cruise control: to activate it, press the right-hand throttle down for 10 seconds. To deactivate cruise control, press either the right-hand throttle or the brake button.
For folding the scooter, ensure it is powered off. Hold the tiller and pull out the spring pin on the right folding panel, then rotate the spring pin counterclockwise. Insert the hook on the tiller into the loop on the rear fender buckle. A click indicates successful folding. To unfold, press the rear fender and pull the tiller up until the spring pin inserts itself into the folding lever, locking the mechanism.
Regular cleaning and maintenance will extend the life of your electric scooter. If the scooter is dirty, wipe it with a soft, damp cloth. For brake adjustments or service, contact the customer service team. Do not attempt to repair the scooter yourself, as this can void the warranty and risk damaging the device.
If the tire pressure is low, fill it to the recommended PSI, which is 50 PSI. Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean the scooter, as these can severely damage its appearance and structure. Avoid using a pressure washer, as it can damage the electronics.
When not in use, store the scooter in a dry and cool location. Avoid storing it outdoors, as sun exposure can damage its appearance and reduce the life of the battery and tires. If the tiller feels loose or wobbly, you can tighten the screws. Open the plastic cover and use an Allen wrench to tighten the screws as shown in the figure in the manual.
Only use the approved Gotrax power adapter to charge the scooter; using other adapters may pose a risk of fire or equipment damage. Improper disposal of used batteries can seriously pollute the environment, so always comply with local disposal regulations. Store the scooter and power adapter in conditions that do not exceed 122 degrees Fahrenheit or fall below -4 degrees Fahrenheit. The scooter contains no user-serviceable parts. Prolonged exposure to UV rays, rain, and other elements can damage the enclosed materials, so store it indoors when not in use.
The manufacturer frequently updates user manuals on gotrax.com and reserves the right to update and change manuals online. For troubleshooting or warranty information, contact the customer service team or visit gotrax.com.
General| Motor | 300W |
|---|---|
| Max Speed | 15.5 mph (25 km/h) |
| Max Load | 220 lbs (100 kg) |
| Charging Time | 4-5 Hours |
| Foldable | Yes |
| Tires | 8.5" Pneumatic Tires |
| Brakes | Disc Brake |
| Range | 17 miles |
To Next Page
