30
Setting interface: When the speed is zero, press and hold and for 2 seconds to
enter the setting interface.
(Wheel diameter, value cannot be adjusted)
Speed Limit Setting: In the speed limit setting interface, you can use short press
and to increase/decrease the setting. The setting range is 17-45 km/h (11-28 mph),
with a default value of 32 km/h (20 mph) when shipped from the factory. After complet-
ing the setting, long press key to save and exit.
This setting can only adjust the speed limit for the assisted mode. The speed limit for the
electric mode is fixed at 32 km/h (20 mph) and cannot be adjusted.
To Next Page
Loading...
