Battery Information
CHARGING THE BATTERY
1. When using the charger for the rst time, carefully check whether the rated output
voltage of the charger is consistent with the battery voltage and check whether the
charger input voltage is consistent with the grid voltage.
2. When charging, rst put the charger in a ventilated place, then insert the charger
output plug into he charging port. Plug the electrical power plug into the 100-240V
50 HZ AC Power Supply. Be sure to keep the input plug in contact with the AC outlet.
3. After charging, the input plug of the charger shall be pulled out rst, and then the
output plug connected with the folding car shall be pulled out. Do not connect the
charger to the charged power socket for a long time without charging.
To Next Page
Loading...
