Gotrax EBE4 User Manual

OVERVIEW OF KEYS
1. Long press "M" to turn on the panel. Short press "M" to switch the interface in ODO/
TRIP/VOL/CUR/TIME mode when the panel is on.
2. Long press "M" to turn o the panel when it's on. Short press the up key + to increase
the PAS level, short press the down key - to decrease the PAS level.
3. Long press the up + key to adjust the parameter. In the setting interface, short press
"M" to switch parameters, and long press MODE to add ("A" on the left side)/minus ("D"
on the left side) the value.
4. After the charge, short press "M" to switch to the next parameter and save the last
parameter, or long press MODE and the parameter will stop blinking and be saved.
Long press "M" + MODE to exit the parameter setting interface, or wait for 10 seconds
and automatically exit the mode.
5. The throttle is used to adjust the motor rotational speed. Turn it from top down and
the motor will accelerate, release the lever and the motor will decelerate.

Gotrax EBE4 Specifications

General

Brand	Gotrax
Model	EBE4
Category	Scooter
Language	English