Brake adjustment: If the brake is too tight against the brake, turn the brake
cable nut counterclockwise to loosen the brake cable, if the brake is too loose,
turn the brake wcable nut clockwise to tighten the brake cable. (Figure 2)
Tightening the Tiller: If you notice that the tiller is loose or wiggles while
riding, you can tighten the screws. Open the plastic cover, and use the Allen
wrench to tighten the screws as shown in the figure below. (Figure 1)
Figure 1 Figure 2
15
To Next Page
Loading...
Need help?
General
