Need help?Do you have a question about the Gotrax Glide and is the answer not in the manual?
Always wear a helmet and ensure the hoverboard has a full battery before riding.
Be aware of local road laws, respect pedestrians, and avoid wet conditions.
Ensure adult supervision; avoid roadways, steep inclines, pools, and riding under influence.
Avoid water damage, negligent care, extreme riding, and product modifications.
Keep body parts away from moving parts and check hoverboard before use.
Connect charging plug; red light indicates charging, green light indicates full charge.
Learn to power on/off and switch between self-balancing and karting modes.
Understand how to accelerate and turn by shifting weight and using toes.
Step-by-step guide to calibrate the hoverboard's foot pedals and sensors.
This document serves as the user manual for the GOTRAX Glide hoverboard, a self-balancing electric scooter designed for personal transportation. The manual provides essential information for operating, maintaining, and troubleshooting the device, emphasizing safety precautions and proper usage.
The GOTRAX Glide hoverboard is designed to offer a "smarter hoverboard" experience, providing an intuitive and engaging way to travel. Before embarking on any ride, it is crucial for all users to thoroughly read and understand the entirety of this manual. Special attention is drawn to riders under 18 years of age, who are advised to obtain parental permission before operating the hoverboard.
Safety is paramount when using the GOTRAX Glide. Riders are strongly advised to always wear a helmet to protect against potential head injuries. Before each ride, ensure the hoverboard has a full battery to prevent unexpected power loss. It is also imperative to be aware of and adhere to all local road laws and regulations. The manual issues a stern warning regarding the risk of injury, stating that adult supervision is required, and the hoverboard should never be used on roadways, near cars, on or near steep inclines or steps, or around swimming pools or other bodies of water. Riders must always wear appropriate footwear and never allow more than one person on the hoverboard at a time. Riding under the influence of drugs or alcohol is strictly prohibited. Furthermore, riders should always respect pedestrians and avoid riding in wet conditions, as this can cause the hoverboard to slide, leading to injury, and can also damage the electronics, voiding the warranty.
The manual also outlines several critical warning messages. The GOTRAX Glide is not waterproof, and any water damage to the electronics is not covered by the warranty. Riding in wet conditions is not only dangerous but can also result in injury. The warranty does not cover physical damage resulting from negligent care or extreme riding. The manufacturer stresses that riding the GOTRAX Glide hoverboard carries an inherent risk of severe injury or even death due to loss of control, collisions, and falls. Users are advised to exercise caution and ride at their own risk. Modifying the product from its original manufacturer's design is prohibited. During operation, hands and all body parts must be kept away from moving parts. Before each ride, a thorough check of the hoverboard is recommended to ensure it is operating correctly. The hoverboard is not intended for children under the age of 8. Finally, the maximum load rating of 176 lbs must never be exceeded.
The hoverboard comes fully assembled, simplifying the initial setup process. Upon unboxing, users should verify the presence of the hoverboard itself and the approved power adapter/charging unit. All packaging material should be removed, and each item inspected for any accidental damage that may have occurred during shipping.
To power the hoverboard on, users need to press and hold the silver button located on the back of the hoverboard for 1 second. To power it off, the same button should be pressed for 1 second. The GOTRAX Glide features a Mode Switch, allowing users to toggle between self-balancing and non-self-balancing modes. A double-click of the switch button within 1.5 seconds in the shutdown state will initiate this change. In self-balancing mode, the hoverboard cannot be turned off by pressing the switch button while riding, but it can be turned on and off normally in standby. In non-self-balancing mode (also referred to as karting mode), the hoverboard can be switched on and off normally in both riding and standby states.
Controlling the hoverboard involves subtle body movements. To accelerate forward, gently push down with your toes, being prepared for the board to lean forward. For backward acceleration, gently lift your toes, preparing to lean backward. To turn right, gently push down with your left toes and shift your weight to the right. To turn left, gently push down with your right toes and shift your weight to the left. To stop, return to an upright position with your weight evenly balanced.
The hoverboard provides alerts for low battery and overheating. When the battery is low, the hoverboard will beep, and red LED lights will flash. Upon hearing the beep and seeing the red LED, users should dismount and charge the device. An overheat alarm will sound if the motor runs at high speed for an extended period. When the motor temperature is high, the hoverboard will beep continuously and move very slowly, with the red light flashing. If the hoverboard continues to run under these conditions, the control system will cut off power to protect the motor from damage. In such cases, riders should stop immediately and wait for the motor to cool down before resuming.
Riding tips include mounting the board from the rear, which can be identified by the power button and charging port. Riders should place the hoverboard directly in front of their feet, step onto one platform, and then quickly step onto the other. Dismounting should always be done from the back. The hoverboard performs best on smooth surfaces like car parks, smooth roads, and footpaths. Users are encouraged to be aware of the terrain and watch out for curbs and obstacles.
The GOTRAX Glide also features a Bluetooth speaker. This speaker is automatically enabled and discoverable when the hoverboard is powered on. To connect, power on the hoverboard, then enable Bluetooth on your mobile device and search for "GLIDE." Once found, click to connect. The hoverboard will voice a confirmation when the connection is successful. To maintain a stable connection, ensure the mobile device and hoverboard remain within a reasonable distance. Once paired, music or audio from the mobile device will broadcast through the hoverboard's Bluetooth speaker.
Maintenance and repair are crucial for extending the life of the hoverboard. Regular cleaning is recommended. If the hoverboard is dirty, it should be wiped clean with a soft, damp cloth. Harsh cleaning agents such as alcohol, gasoline, kerosene, or other corrosive chemical solvents should never be used, as they can severely damage the hoverboard's appearance and structure. Pressure washers are also to be avoided due to potential damage to the electronics. When not in use, the hoverboard should be stored in a dry and cool location. Storing it outdoors is not advised, as sun exposure can damage its appearance and cause wear on the battery and tires.
Troubleshooting common issues often involves calibrating the hoverboard. To calibrate, start with the hoverboard powered off. Adjust the foot pedals until they are level with each other and the ground. Press and hold the power button for 10 seconds until the LED lights flash. Then, press the power button to turn it off. Finally, press the power button to turn it on, and the hoverboard will be calibrated. The manual notes that this process may need to be repeated multiple times (e.g., three times in a row) for the calibration to fully take effect.
Battery information emphasizes using only the approved GOTRAX power adapter for charging, as other adapters may pose a fire risk or damage the equipment. Improper disposal of used batteries can seriously pollute the environment, so local disposal regulations must be followed. The hoverboard and power adapter should be stored within a temperature range of 32 to 104 degrees Fahrenheit. A warning about the risk of fire and the absence of user-serviceable parts is included, along with a caution that prolonged exposure to UV rays, rain, and other elements can damage the enclosed materials, necessitating indoor storage when not in use. Users are reminded to only use batteries and chargers specified by the manufacturer.
For further troubleshooting or detailed information, users are encouraged to contact the GOTRAX customer service team. The manual also states that GOTRAX frequently updates its user manuals online and reserves the right to update and change manuals. Warranty information can be found by visiting GOTRAX.com.
General| Wheel Size | 6.5 inches |
|---|---|
| Motor Power | 250W |
| Charging Time | 4 hours |
| Tire Size | 6.5 inches |
| Tire Type | Solid rubber |
To Next Page
