Using the anti-theft device
At the bottom of the stem is a built-in anti-theft device in the form of
a steel cable that can be locked with a numerical code.
1. Locking head
2. Anti-theft cable
3. Anti-theft cable storage space
4. Lock
5. Locking button
6. Dials
7. Code reset button
3
1
2
4
5
6
7
How to unlock the anti-theft combination lock.
1. Unlock the anti-theft device with default code 0000.
2. Slide the reset button to the right (SET mode)
3. Set a new code by turning the dials(Please shoot a photo)
4. Slide the reset button to the left
To attach the scooter to a fixed support:
1. Enter the safety code
2. Pull out the anti-theft cable
3. Insert the cable head into the lock hole
4. Turn the dials to lock the anti-theft device
To remove the scooter from a fixed support:
1. Enter the safety code
2. Press the unlock button
3. Pull the cable head out of the lock
4. Pull the cable back to the stem tube
After using, please push up on the cable of the anti-theft device into the stem
tube and secure the cable head in the storage bracket to prevent it from
hanging down and getting caught in the wheel.
To Next Page
Loading...
Need help?
General
