The charging
09
Important to know
No status of the charging process is shown in
the display of your Schwalbe.
Always connect the charging cable to your
Schwalbe first and then to the socket.
Reverse the order when disconnecting.
Never switch on your Schwalbe while it is
charging as this may cause errors on the
screen. Always disconnect the charger first
and wait 60 seconds before switching your
Schwalbe back on.
Do not charge the batteries in rain. It is the
best to charge the batteries indoors.
Never disconnect the Anderson charging
cable before the charger is completely turned
off. Turn off the charger by disconnecting
the power cable from AC socket. It takes
10 seconds, then the status LED is off. Now
you safely disconnect the Anderson charging
cable.
•
•
•
•
•
EXTERNAL POWERLAND AC/DC 48 V
BATTERY CHARGER
To Next Page
Loading...
