What to do if error E06 appears on GOWIN Motherboard?
If you encounter error E06 on your GOWIN Motherboard, attempt re-programming the device. You may need to retry this process up to three times to resolve the issue.
How to fix error E05 on GOWIN Motherboard?
For error E05 on your GOWIN Motherboard, the suggested solution is to reconfigure the data stream file.
General| Category | FPGA |
|---|---|
| Package Options | QFN, BGA |
| Process Technology | 55nm |
| Technology | FPGA |
| Number of LUTs | Varies by model |
| Number of Flip-Flops | Varies by model |
| I/O Count | Varies by model |
| Memory | Embedded SRAM |
| I/O Standards | LVCMOS, LVTTL |
| Operating Voltage | 1.2V |
| Operating Temperature | -40°C to 85°C |
| Supply Voltage | 1.2V |
| Series | GW1NR Series |
| Manufacturer | GOWIN Semiconductor |
To Next Page
