Connecting to Gas
Check that the gas you are using is
specified on the data plate page.
The gas cylinder used must have a safety
collar to protect the valve assembly. Do
not use a cylinder that is rusty, dented
or has a damaged valve.
We recommend using a 9kg gas bottle
as a minimum in conjunction with
Tread.
Connect the regulator to the gas
canister, following the instructions for
your regulator accordingly. Do not force
the regulator as this could damage the
gas bottle.
WARNING: If at any point you smell gas:
Shut off the gas from the cylinder,
turn off the switch on Tread and
extinguish any open flames.
If odour continues, move away from
Tread and gas supply then contact your
gas supplier or fire service.
Ensure that the LPG cylinder or regulator
valve is closed.
Do not store a spare LPG cylinder under
or near this appliance.
19 kg
5 kg
Capacity
25
To Next Page
Loading...
