Testing For Leaks
WARNING
You should always check for gas
leaks every time you disconnect and
reconnect a gas fitting. Never ignite
burners when leak checking.
To test for us, apply a mixture of soapy
water with a brush to the highlighted
areas and any cracks along the hose. If
a leak is present the solution will bubble.
If there is a leak at the hose to oven
connection, re-tighten the fitting with
a spanner and check for leaks by
applying a soap-and-water solution to
the highlighted areas with a brush. If a
leak persists turn off the gas and DO NOT
OPERATE THE OVEN.
If there is a leak at the valve connection,
remove LPG cylinder. Do not operate
oven. Use a different LPG cylinder and
recheck for leaks with the soap-and-
water solution.
31
To Next Page
Loading...
