PUSH FIT REGULATOR
Make sure the lever is in the horizontal
position so the button can be pressed.
Pressing in the button, place the
regulator onto the gas bottle. After
releasing the button, turn the lever to a
vertical position. This connection must
be tested for leaks before using the
oven.
CLOCKWISE/ANTICLOCKWISE
REGULATOR
Ensure the gas bottle is turned off. Align
the regulator and the gas bottle threads
and carefully begin to tighten ensuring
the threads aren’t crossed. Continue to
tighten until a tight fit has been made.
This connection must be tested for leaks
before using the oven.
30
To Next Page
Loading...
