grace design m906
owner’s manual
8
grace design m906
owner’s manual
9
Unpacking and Installing your m906 System
The m906 is shipped in two boxes. Box 1 contains:
•the m906 mainframe unit
•external power supply
•AC power cord
•6-pin XLR DC power cable
•small plastic bag containing four self-adhesive rubber feet
•warranty registration card
•some Grace Design literature for your reading pleasure
Box 2 contains:
•the remote control unit
•25’ remote cable
•remote unit height/angle adjustment legs
•small plastic bag containing four self-adhesive rubber feet
OPEN AND INSPECT THE BOXES
Open both shipping boxes, carefully remove the m906 system components and put them aside.
Before you go any further, check to make sure the above listed components are included with your
shipment. If you believe something is missing, contact your friendly Grace Design dealer and they will
make sure you’re taken care of.
SAVE YOUR BOXES!!
We strongly encourage you to save all of the boxes and shipping materials supplied with your m906.
They are specially designed to properly protect these valuable components, and in the unlikely event
that you need to return them for service, only these OEM shipping materials can ensure their safe
return to our factory.
REGISTER YOUR UNIT
Also, we strongly urge you to register your unit with Grace Design. We provide a limited 5 year warranty
on all of our products, but if you don’t register your system it’s hard for us to help you if and when help
becomes necessary. So please take a few minutes to complete the enclosed warranty registration card
and mail it in, or simply go to the warranty registration form on our web site. Thank you!
To Next Page
Loading...
