10 Grace Wireless Internet Radio
If it can’t find one then the display will show:
Steps For Connecting Your Radio To Your Wireless
Network (Continued)
No networks
Found
If this happens then you will have to setup your wireless access point - see the instructions
supplied with your wireless router / access point.
Whentheradiondsyourwirelessnetwork,itdisplaystheESSIDfortheaccesspointonthe
screen - this is a name that is allocated to the access point by the person who set up your
network - for example:
< My Home Network >
It is possible, and in some locations highly likely, that your radio will find more than one wireless
access point, in which case you can choose which one you want to connect to. Turn the knob on
theradiotoseetheESSIDforeachaccesspointtheradiohasfound.
For optimal performance you may want to check your home network settings to make sure your
radio is on a deferent channel than your neighbors. To do this please consult your Wi-Fi router
owners manual.
WhentheESSIDfortheaccesspointyouwanttoconnecttoisdisplayedonthescreen,
press the SELECT button.
If your network is not configured to need an encryption code, the screen should say:
Step 3 - Connect to the wireless network
Connecting to
Network
To Next Page
Loading...
Need help?
General
