Graco 206405 - Mounting Hole Layout; Technical Data; Model 206405 Shown

306531 23
Dimensions
04217B
1/4 npt(f)
Fluid Outlet
Model
206405
13 inches
(330 mm)
Model
206699
26.69 inches
(677.7 mm)
Model
206700
33.62 inches
(854 mm)
3/8 npt(f)
Air Inlet
Technical Data
Maximum Working Pressure 2700 psi (186 bar). . . . . .
Fluid pressure ratio 15:1. . . . . . . . . . . . . . . . . . . . . . . . . .
Air operating range 40 to 180 psi (3 to 12 bar). . . . . . .
Air motor effective diameter 3 in. (76 mm). . . . . . . . . . .
Stroke 3 in. (76 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air consumption 17 cfm/gallon pumped at 100 psi. . . .
(0.476 m
3
/liter at 7 bar);
up to 30 cfm with pump operated
at 180 psi and 66 cycles/min.
(up to 0.84 m
3
/min with pump operated
at 12 bar and 66 cycles/min.)
Pump cycles per gallon (liter) 90 (24). . . . . . . . . . . . . . .
Delivery 0.66 gallons/minute (3 liters/minute). . . . . . . .
Maximum recommended
pump speed 66 cycles/min;. . . . . . . . . . . . . . . . . . . . . . .
0.7 gpm (32 liter/min)
Recommended speed
for optimum pump life 15 to 25 cycles per min. . . . . . .
Wetted parts Carbon Steel, Brass,. . . . . . . . . . . . . . . . . .
Copper, Aluminum,
PTFE, Nitrile Rubber, Leather
Approximate weight 22 lb (10 kg). . . . . . . . . . . . . . . . . . .
Mounting Hole Layout
161023 Gasket
Two or Four
0.265” (7 mm)
Dia. Holes on 5”
(127 mm) Bolt Circle
3” (76.2 mm) Dia.
2 Hole Mounting
Pattern
4 Hole Mounting
Pattern
04127