Table
of Contents
Warnings 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Startup 8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shutdown
and Care
10.
. . . . . . . . . . . . . . . . . . . . . . . . . .
Flushing 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spin Test 17.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General
Repair Information
18.
. . . . . . . . . . . . . . . . . . . .
Motor
Brush Replacement
19.
. . . . . . . . . . . . . . . . . . . .
Power
Supply Cord Replacement
20.
. . . . . . . . . . . . . .
On/Off
Switch Replacement
21.
. . . . . . . . . . . . . . . . . . .
Pressure
Control Replacement
22.
. . . . . . . . . . . . . . . .
Filter
Board Replacement
23.
. . . . . . . . . . . . . . . . . . . . .
Drive
Housing, Connecting Rod, and Crankshaft
Replacement 24.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motor
Replacement
26.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Displacement
Pump Repair
28.
. . . . . . . . . . . . . . . . . . . .
Parts
Drawing – Loboy Sprayer
31.
. . . . . . . . . . . . . . . .
Parts
List – Loboy Sprayer
32.
. . . . . . . . . . . . . . . . . . . .
Parts
Drawing and List – Displacement Pump
33.
. . . .
Parts
Drawing – Pressure Control
34.
. . . . . . . . . . . . . .
Parts
List – Pressure Control
34.
. . . . . . . . . . . . . . . . . .
Wiring
Diagram
35.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical
Data
35.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions 35
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The
Graco W
arranty and Disclaimers
36.
. . . . . . . . . . .
Graco
Phone Number
36.
. . . . . . . . . . . . . . . . . . . . . . . . .
Symbols
Warning Symbol
WARNING
his
symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This
symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
FIRE AND EXPLOSION HAZARD
Improper
grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury
.
If there is any static sparking or you feel an electric shock while using this equipment,
stop
spraying immediately
.
Do not use the equipment until you identify and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
Keep the spray area free of debris, including solvent, rags, and gasoline.
Electrically disconnect all equipment in the spray area.
Extinguish all open flames or pilot lights in the spray area.
Do not smoke in the spray area.
Do not turn on or of
f any light switch in the spray area while operating or if fumes are present.
Do not operate a gasoline engine in the spray area.
WARNING
To Next Page
Loading...
