Graco Ultra 333 231-007 User Manual

INSTRUCTIONS/FIELD REPAIR e
307-643
ORACO
Rev E
SUPERSEDES D ’
This manual contains IMPORTANT
WARNINGS and INSTRUCTIONS
READ AND RETAIN FOR REFERENCE
120 VAC, 15 Amp
ULTRA’“333 AIRLESS PAINT SPRAYER
3ooo psi (207 bad MAXIMUM WORKING PRESSURE
Model 231-007, Series A
Without hose, gun, spray tip kit
Model 231433, Series A
Includes Soraver Model 231-007.
or tip
Hose. GI
Spray Tip Kit, and Spray Tip of ‘choice.
INDEX
Warnings ................................ 2, 3
Avertissement ......................... .4, 5
Advertencia
............................
.6, 7
Introduction..
.............................
.8
Setup ........................................ .9
Operation ............................. 10, 11
Shutdown and Care.. .................. .11
Flushing Guidelines..
...................
.12
Troubleshooting Guide..
.........
.14, 15
Displacement Pump Repair ...... ..15-17
Motor Brush Replacement ............ .18
Sprayer Parts Drawing 8 List....20, 21
How To Order Replacement Parts ...
.21
Displacement Pump Parts
Drawing 8 List ........................ ..22
Technical Data .............. ..Bac k Cover
PATENT NO. 4,397,610
PATENTED 1963, CANADA
BREVETE 1964
FOREIGN PATENTS PENDING
Never use l,l, 1 -trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing
such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibility of explo-
property damage.
Consult your fluid suppliers to ensure that the fluids being used are compatible with aluminum and zinc parts.
GRACO INC. P.O. Box 1441 MINNEAPOLIS, MN 55440-1444
@COPYRIGHT 1983 GRACO INC.

Graco Ultra 333 231-007 Specifications

General

Brand	Graco
Model	Ultra 333 231-007
Category	Paint Sprayer
Language	English

Summary

Fluid Injection Hazard

General Safety

Discusses general safety precautions for high-pressure fluid injection hazards.

Medical Treatment

Provides emergency medical guidance for fluid injection injuries.

Equipment, Hose, Fire, and Moving Parts Hazards

Equipment Misuse Risks

Covers hazards from improper use, modifications, and worn parts.

Hose Safety and Grounding

Details hose integrity, spring guards, and grounding continuity requirements.

Fire and Explosion Prevention

Addresses static electricity, grounding, and safe flushing practices.

Moving Parts Dangers

Setup

Hose and Gun Connection

Electrical Service and Plugging In

Pump Flushing and Paint Preparation

Operation

Pressure Relief Procedure

Critical safety procedure to relieve system pressure before any operation.

Priming the Sprayer with Paint

Installing Spray Tip and Adjusting Pattern

Shutdown and Care

Flushing Guidelines

Troubleshooting Guide and Repair Instructions

Troubleshooting Guide

Electric Motor Issues

Output and Pump Stroke Issues

Displacement Pump Repair

Removing the Pump

Step-by-step instructions for removing the displacement pump assembly.

Disassembling the Pump

Detailed guide on how to disassemble the displacement pump components.

Reassembling the Pump

Instructions for correctly reassembling the displacement pump.

Motor Brush Replacement

Test and Reinstall Brushes

Service Information

ULTRA 333 TECHNICAL DATA

Provides detailed technical specifications for the Ultra 333 sprayer.